Відео

Is it analogue or digital?

fail! no LM308!

Tighter, more articulate. Yes, I would buy one! Tell me how 😊. Nice tele btw

got to ask... how does having symmetrical clippings, as opposed to a-symmetrical clipping, result in less of a clean blend? I would have though the extra diode that you added in series would have raised the forward voltage and reduced the amount of clipping that was taking place?

I have this one comin soon, already in love with the Euphoria!

Thanks

count on your fingers 2, 4, 8, 16 ( doubling up from 2 ) , call a fifteen watt amp 4 fingers then... Pluss one for a tube amp.....five fingers, 5 x 3 db = +15 db ( pure coincidence ) Anyway: then take your guitar Speaker 1w/1m sensitivity ... say it's 97db for one speaker, add 3db for a second, and 6db for a fourth.....say two, 100db, add your ^ amp = 115db 115db Average, that's dimed , that's generally good for gig.

You are the real Master !!! 👍

1 Tube

I wouldn't dream of telling you anything about how you should run pedals or stack drives, but for me personally I run my Tumnus Deluxe at the end of my drive chain rather than at the front. I run my Tumnus in a typical Klon mode with gain at about 10:00 and level at about 2:00, and let the Tumnus spread its buttery goodness all over everything else. And I leave my Tumnus on all the time unless I am just looking for super clean sparkly tone. In front of the Tumnus I have a custom Tube Screamer and a Boss SD2. When I want a lot of crunch I turn on the SD2 and when I want distortion I turn on the TS turned way up on the gain. And when I want nasty I turn on all 3. I think the Tumnus Deluxe EQ gives me the best tone control which is why I put it last in the chain, and then when I discovered I just like to leave it on all the time it made sense for me to leave it there. Of course, since I don't have a Pantheon my options are a little different than yours. Thanks for the video. You make great pedals and have a wonderful way of teaching to boot. And that you know who Tumnus is makes me especially happy. :)

Great song choice 👌

Got my first Mz running it through my 4x10 hot rod Deville III I only paid 30 bucks for the thing so I figured what the hey! Now thanks to you I have a chance at enjoying it a little!

There's also the thing Vai once said (about using Boss). You could literally buy one anywhere (in the world) if you needed one at short notice.

3

If you want to go the Van Halen way, you have to place the phaser before the distortion. Since his distortion was coming from the amp and the phaser pedal was in front of his amp...that's the way to go.

I've had belle for a while and like it, I've got a tumnus on the way in the mail!! Would you guys recommend tumnus going into belle or belle going into tumnus. I would have belle for my base rhythm crunch and then stack tumnus for lead ?

Thanks for this helpful video! Don't know if I'm alone on this, but I am trying to put together a straight to the front ampless board with the Cory Wong compressor as the DI. Seems logical, since it will be after delay and reverb, to just use the boost function and only turn the compression on when the verb and delay are off. What I'm driving at here: a video focusing on different DI solutions would be very cool.

what is weird... i use an mxr brick to power everything. never had this noise until recently? its doing it thru all 3 of my pedals. so seems to point to a ground issue. the pedals did not come with a power adapter, so i do not have really anyway to troubleshoot this.

Thanks for all your helpful videos ! I found a Boss CE 3 chorus used, but it makes a sonic ping pong-y noise in the background when on. Would that be a power supply issue, or maybe wires aren’t shielding due to old plastic, or something like that ? Thanks !

Bummer that it doesn't have led meters. So close.

Will the Auto wah behave like a standard wah pedal when you use the expression pedal?

Another win from Wampler! Not only is this channel amazing and I’ve learned so much, both as an engineer and a musician about the pedals that help make even my attempts at noise sound terrific. Thank you for the great sounding pedals re-released at prices the working guy or gal can afford and not worry about dragging a priceless artifact around, and with the extra benefit of the updated version often sounding better, AND with more features. Now.....time for a shootout/comparison! Ibanez MT-10 Mostortion vs Karma MTN-10 vs Wampler Mofetta! Let's get it on!

Fantastic demo!

Does the Phenom stack well with the Tumnus?

This sounds like something that would have been left out of Exile on Main Street because Keith threw up on the mixing desk while trying to detox from heroine. The vocals give me 70s Mick Jagger vibes when set in the context of a country song.

Really dumb question....Could run this Helix into a 16ohm cabinet? Would it power such a thing or is it just a pedal?

I build pedal kits for fun. I’ve done a few videos on it. The stew mac kits are pretty much pedal pcb with a different color and all of the components sourced for you. Another note, stewmac usually has higher quality pots and jacks over some of the competitors. In addition, you don’t have to do any build sheets and find all of your shit. Some people like doing that, spending time in small bear or tayda and finding their best deal for parts. Me, I don’t have time to fart around finding the best deal on caps from that site and resistors from this site. I like buying complete pedal kits that I can build like folks that do model cars and such. I think there is an absolutely great market for pedal builders to sell pedal kits of their pedals, EVEN AT A PREMIUM OVER THE PRODUCTION MODELS. I would pay to buy a tumnus that I could build. If I was a pedal builder I’d consider offering pedal kits. I do it for fun soldering stuff. I do amp and guitar repairs and I solder a lot. For me making pedals is fun. I gift them to friends or sometimes sell them to buy more kits.

One question: Is the "unmodded" setting a more or less exact copy of the MT-10? I didn't get that from the video. Btw: I think it is so cool that you keep an eye out for the whishes of your fans! When I saw your Mostortion video, I also thought immediately: please make this a pedal! Nice to have some whishes come true! :)

I feel there’s definitely a difference between some of them, but none of them are better than any other, just different. And granted that you can either pay $150 for an 808 reissue or 29.99$ for a behringer copy that sounds 95% identical and sounds just as good as any other tube screamer, there’s no practical reason to buy the real one

You…monster.

thanks for these cool tips !

I want an overdrive to go into the front of my ultra-clean Roland JC-22. Do you think this would fit the bill?

Radios, rifles, and guitars. No limits.

Can the SLO-30 be played at bedroom levels without the Cops coming over.

Tomemos en cuenta que usa Single Coil. Con HH es distinto

Thank you Brian! I almost gave up on my BJ. Your EQ trick works great! It’s now gig worthy for small gigs. Nice to put my eq pedal on my board too. I never really had a use for it until now. Thank you!

The non-Ge Tumnus was my favorite drive pedal I’ve ever used. This one is even better!! It’s never leaving my board. And an unexpected bonus…the two Tumnuses (Tumni?) pair/stack surprisingly well! 🤘🏻

That JFET drive is pure AC/DC.

WHERES THE OD-2! I crave knowledge for the od2 please supply the knowledge lord wampler

Please keep doing stuff like this. You and Josh are easily my favorite UA-cam channels right now. I watch everyday 😁👍thanks Brian!

#2 was my favorite ,then #5 then #4

Problem I have now is solved. Thank you

PedalPCB and the individual/all who run it are exceptional. Their forums are an absolutely priceless resource!

All sound the same,

Just bought one Zero distortion returning

Ive always liked the Tumnus 😊

It'd be really really cool if there was a student discount option for your courses, I would love to learn everything but I can't come near the full price of the course I'm afraid

A lil bit snug, don’t over tighten and warp the basket or surround!

I bought a Boss IR2, does it make sense to add a BD2 into the chain?

I really think that’s an incredibly useful amp, it responds well to both single coils and humbuckers. Of course it should. It’s a Soldano. You’re paying a premium for it.